at the moment just interest to have a demo board to experiment with touchGFX, as I just saw a webinar from ST
ip:93.43.221.174
Subject:[First Page Inquiry] TSD 2.8 inch 480x480 resolution circule tft lcd display with wide temperatureTime:2026-03-03 14:07:12
您好,這款型號TST028WVBS-S64,請幫忙提供量產及樣品報價,謝謝
ip:61.222.86.13
Subject:[First Page Inquiry] 3.0 Inch 432xRGBx432 RGB Interface HX8363-A IC TFT LCD Display Module 1000 nits Normally Black 50g TFT Display ScreenTime:2026-03-03 07:27:48
Hello,
I am interested in your 3.0 inch 432×432 RGB TFT module with the HX8363-A driver and 1000 nits brightness.
Could you please provide:
1. Confirmation of resolution (432×432 or 320×240)
2. Full datasheet (mechanical + electrical)
3. Backlight driving requirements (current, voltage)
4. MOQ
5. Unit pricing for:
- 1–2 pcs (evaluation samples)
- 5 pcs
- 100 pcs
- 1000 pcs
6. Lead time for samples and production
I am currently evaluating the display for an embedded system project using an STM32H7 microcontroller. I would like to purchase 1–2 units initially for validation and testing before moving to larger quantities.
Thank you.
Best regards,
Samuel O’Hearne
ip:72.208.221.227
Subject:[First Page Inquiry] Leave a MessageTime:2026-03-01 10:02:04
We drive targeted visitors straight to your website - and your campaign can go live by tomorrow.
Can I send you a quick example?
Hello,
I am requesting a quote and technical feasibility review for a custom FSTN graphic LCD module. The specifications below are preliminary and provided for quotation purposes. Final confirmed drawings and dimensions will be provided prior to tooling.
Preliminary Target Specifications:
Viewing Area:
Approximately 66 mm × 30 mm (minor dimensional adjustments acceptable for cost optimization)
Resolution:
Approximately 100 × 30 active pixels (graphic area)
Approximately 10–20 indicator icons positioned above the main graphic area
Preferred implementation: Use a standard 128 × 32 graphic controller architecture and map the visible area within that structure. Icons/indicators may be mapped into unused dot rows of a 128 × 32 controller to simplify design.
Any unused rows or columns may remain electrically present but not visible.
Display Type:
FSTN, positive mode, reflective (no backlight)
Style: black/very dark blue segments on gray background (similar to JAZZ-BC-W)
Custom viewing angle (please advise available options such as 6 o’clock or 12 o’clock)
Interface:
SPI required
Parallel interface optional (please quote both if available)
Controller should preferably be compatible with common open-source libraries such as u8g2 (e.g., ST7565/ST7567 compatible or equivalent 128 × 32 controller)
Mechanical Requirements:
(COG area height) target ≤ 3 mm
Standard COG construction preferred
COG on top; viewing angle optimized for correct contrast in normal user orientation (similar to 6 o’clock angle with top COG)
COF is not required if COG height remains ≤ 3 mm
Custom FPC length (to be finalized; please advise tooling implications)
Electrical:
Software-controlled contrast via controller command (no external potentiometer required)
Low-power passive drive suitable for embedded MCU (ESP32-class)
Cost Optimization Preference:
Preference is given to solutions utilizing an existing 128 × 32 controller platform to minimize tooling (NRE) and unit cost. If minor dimensional or pixel adjustments improve cost efficiency, please advise recommended changes.
Please provide:
Tooling (NRE) cost
Unit pricing at different MOQs (e.g., 500 / 1000 / 3000 pcs)
Estimated lead time for tooling and mass production
Thank you for your time. I look forward to your technical feedback and quotation.
Best regards,
Jesus E Ruiz
ip:73.171.134.63
Subject:[First Page Inquiry] TSD 7 inch tft lcd monitor touch screen 800x480 with RGB interfaceTime:2026-02-27 17:12:01
TST070WVBE-33C with CTP Price at 50 units, 100 units
Email : info@tslcd.com
Tel. : +86-755-28225963
Download
